Skip to content
0 items

Expression Desks Blog

How to Remove Speed Limiter on Electric Scooter ?

by Bilal Aslam 07 Oct 2023 0 Comments

Electric scooters are becoming increasingly popular as a convenient and eco-friendly mode of transportation. However, many electric scooters come with a built-in speed limiter that restricts their maximum speed to comply with local regulations. If you're looking to unlock the full potential of your electric scooter and increase its top speed, you've come to the right place. In this comprehensive guide, we will not only show you how to remove the speed limiter but also provide essential tips for safe and responsible riding.

Understanding the Speed Limiter

Before we delve into the steps to remove the speed limiter, let's first understand what it is and why it's there in the first place.

What is a Speed Limiter?

A speed limiter, also known as a governor, is a safety feature installed in electric scooters to restrict their maximum speed. It is implemented to comply with local laws and regulations, ensuring that riders stay within safe speed limits.

Why is it Installed?

The primary reason for the installation of a speed limiter is safety. Riding at excessively high speeds on an electric scooter can pose serious risks to both the rider and pedestrians. Speed limiters help prevent accidents and ensure responsible riding.

Tools You'll Need

To remove the speed limiter on your electric scooter, you'll need a few tools and equipment. Here's a list of what you'll require:

1. Screwdriver Set

2. Wire Cutters

3. Wire Strippers

4. Soldering Iron

5. Heat Shrink Tubing

6. Electrical Tape

The Step-by-Step Guide

Now, let's get into the nitty-gritty of removing the speed limiter from your electric scooter. Please follow these steps carefully to ensure a successful modification.

Step 1: Safety First

Before you start, make sure your scooter is powered off, and you have all the necessary safety gear, including gloves and safety glasses. Additionally, it's a good idea to read your scooter's manual thoroughly to understand its specific components and wiring.

Step 2: Locate the Controller

The speed limiter is typically connected to the controller of your electric scooter. You'll need to locate the controller, which is usually situated near the battery compartment. Refer to your scooter's manual for guidance on finding the controller.

Step 3: Disconnect the Wires

Use your screwdriver to open the controller's casing. Inside, you'll find wires connected to the speed limiter. Carefully disconnect these wires, making sure not to damage any other components.

Step 4: Identify the Limiter Wires

The limiter wires are usually color-coded. You should see one wire that is different from the others. This is the wire you'll need to modify. Consult your scooter's manual for specific details on identifying the limiter wires.

Step 5: Cut and Solder

Using your wire cutters, carefully cut the limiter wire. Then, strip the ends of the wire to expose the metal. Solder the ends together to complete the circuit. It's crucial to ensure a secure and reliable connection to prevent any electrical issues.

Step 6: Insulate

To ensure a secure connection and prevent electrical shorts, cover the soldered area with heat shrink tubing. Use a heat gun to shrink the tubing in place, and then secure it further with electrical tape. This step is vital for safety and proper functioning.

Step 7: Reassemble the Controller

Once you've made the necessary modifications, reassemble the controller and secure it back in place on your scooter. Ensure that all components are properly aligned and fastened to avoid any issues.

Step 8: Test Ride

Turn on your electric scooter and take it for a test ride in a safe, open area. You should notice a significant increase in speed. However, it's essential to exercise caution during your initial rides to get used to the increased speed and handling.

Tips for Safe Riding

Now that you've successfully removed the speed limiter from your electric scooter, here are some essential tips for safe and responsible riding:

1. Wear Protective Gear

Always wear appropriate protective gear, including a helmet, gloves, knee and elbow pads, and closed-toe shoes, to minimize the risk of injury in case of accidents.

2. Obey Traffic Rules

Follow all local traffic rules and regulations when riding your electric scooter. This includes respecting speed limits, yielding to pedestrians, and using designated bike lanes when available.

3. Perform Regular Maintenance

Maintain your electric scooter regularly to ensure it's in good working condition. Check the brakes, tires, and other components to prevent accidents caused by mechanical failures.

4. Be Mindful of Weather Conditions

Rain, snow, and slippery surfaces can affect your scooter's handling. Exercise extra caution and reduce your speed in adverse weather conditions.

5. Gradually Increase Speed

If you're new to riding at higher speeds, gradually increase your scooter's speed settings and practice safe acceleration and braking techniques to avoid accidents.


Removing the speed limiter on your electric scooter can be a rewarding modification, but it comes with added responsibility. Always prioritize safety and adhere to local traffic regulations when riding your scooter at higher speeds. With these steps and safety tips, you can unlock the full potential of your electric scooter and enjoy a faster, more thrilling ride.

930 x 520px


Sample Block Quote

Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo eu convallis vitae interdum non nisl. Maecenas ac est sit amet augue pharetra convallis.

Sample Paragraph Text

Praesent vestibulum congue tellus at fringilla. Curabitur vitae semper sem, eu convallis est. Cras felis nunc commodo eu convallis vitae interdum non nisl. Maecenas ac est sit amet augue pharetra convallis nec danos dui. Cras suscipit quam et turpis eleifend vitae malesuada magna congue. Damus id ullamcorper neque. Sed vitae mi a mi pretium aliquet ac sed elitos. Pellentesque nulla eros accumsan quis justo at tincidunt lobortis deli denimes, suspendisse vestibulum lectus in lectus volutpate.
Prev Post
Next Post

Leave a comment

Please note, comments need to be approved before they are published.

Someone recently bought a
[time] ago, from [location]

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Edit Option
Have Questions?
Back In Stock Notification
this is just a warning
Shopping Cart
0 items
Electric Bicycles at Expression Desks

Before you leave...

Take 10% off your first order

Enter "SAVE10" at checkout to get 10% off

Continue Shopping